曲面參數二次模擬結合積分奇異降階的矩量法數值計算
Numerical calculation of combining surface parametric quadratic modeling with reducing singularity order of integral in moment method
-
摘要: 該文研究了曲面參數二次模擬結合積分奇異降階的數值方法,用于矩量法計算將目標體用參數二次曲面模擬,通過奇異降階法把積分奇異性從O(1/R2)降至O(1/R)。相比其它一些數值方法,該方法不但簡化了自阻抗元素的計算復雜性,而且增加了計算的穩定性和精確性。該方法計算了某些目標體的雷達散射截面(RCS)。其結果與其它方法所得結果相比較十分一致。
-
關鍵詞:
- 參數二次曲面; 積分奇異性; RCS
Abstract: In this paper, the numerical method of combining surface parametric quadratic modeling with singularity orders reducing in moment method is analyzed. The objects are modeled by parametric quadratic surface. The singularity order of the integral is reduced from O(1/R2) to O(1/R). Compared with other methods, this method simplifies the complexity of self-impedance elements calculating and increases its calculating stability and accuracy. It is applied to calculating RCS of some objects. Good agreement with the results from some other methods is found. -
J.M. Song, W. C. Chew, Moment method solutions using parametric geometry, J. of EM Wave and Applications, 1995, 9(1/2), 71-83.[2]L. Valle, et al., Combining the moment method with geometrical modelling by NURBS surfaces and Bezier patchs, IEEE Trans. on AP, 1994, 42(3), 373-381.[3]王浩剛,聶在平,三維矢量散射積分方程中奇異性的分析,電子學報,1999,27(12),68-72[4]E.H. Newman, Polygonal plate modeling, Electromagnetics, 1990, 10(2), 65-83.[5]W.A. Johnson, Modeling scattering from and radiation by arbitrary shaped objects with the electric field integral equation triangular surface patch code, Electromagnetics, 1990, 10(1), 4163. -
計量
- 文章訪問數: 2611
- HTML全文瀏覽量: 114
- PDF下載量: 723
- 被引次數: 0
下載:
