用FDTD方法模擬穩態電磁散射時開關函數的應用
APPLICATION OF SWITCH-ON FUNCTIONS IN THE 2-D FDTD MODELING TIME-HARMONIC ELECTROMAGNETIC SCATTERING
-
摘要: 在用時域有限差分(FDTD)方法模擬穩態電磁散射時,為了減小穩態建立過程中的沖激效應,縮短建立穩態所需時間,本文引入了開關函數,并給出幾種開關函數下FDTD的穩態建立過程。
-
關鍵詞:
- 電磁散射; 時域有限差分(FDTD)方法; 開關函數
Abstract: When the time-harmonic electromagnetic scattering is modeled via the finite-difference time-domain (FDTD) technique, an additional switch-on function is introduced in order to reduce the ringing phenomenon for initial transient process in FDTD calculation. Some examples are given to demonstrate the feasibility. -
A. Taflove, K.R. Um ashankar, Proc. IEEE, 77 (1987)5, 682-699.[2]G. Mur, IEEE Trans. on EMC, EMC-23(1981)4, 377-382.[3]郭利強,李明之,葛德彪,厲明博,計算物理,9(1992) 4,655-660.[4]G.T. Ruck, D.E. Barrick, W.D. Stuart, C.K. Krichbaum, Radar Cross-Section Handbook, New York, Plenum Press, (1970), Chap. 4. -
計量
- 文章訪問數: 2323
- HTML全文瀏覽量: 113
- PDF下載量: 643
- 被引次數: 0